Stripmatic 944

Stripper Crimper

Stripmatic 944

Artos Stripmatic 944 offers users the ability to strip and crimp in one step, improving quality and reliability.

Electronically controlled, the Stripmatic 944 features a job button for easy set-up and testing. The stripping unit is pneumatically operated, and is designed for either side or end feed terminals (Left to Right or End to End). All settings including wire diameter, strip length, and wire crimping position are easily adjusted for quick set-up and change over.

An optional bad wire chop-off unit is available to be used in conjunction with a crimp force monitor. These options ensure your crimping process passes quality control, and only crimps passed as good are used in your production. Defective crimps are cut and automatically removed, rendering the bad crimp unusable.

Features

  • Combines the stripping process with the crimping process to provide improved process quality and efficiency.
  • Integrated stripping unit will strip the inserted wire while being held in the crimping position. This process ensures the proper strip length and positioning of the end of the wire in the terminal, improving overall crimping quality.
  • Electronically controlled crimping unit features a job button for ease of set-up, and will accept either side feed or end feed terminals.
  • Integrates perfectly with our Globalstar Family of terminal applicators.
  • Available with optional crimp quality monitor and reject wire chop off.

Options

  • Work Light
  • Crimp Force Monitor
  • Reject Wire Chop Off

Specifications

Wire Size
26-14 AWG (0.14-2.5 mm2)
Voltage
Single Phase 110 V 60 Hz, 220 V 50 Hz
Air Supply
80 PSI (6-8 Bar)
Dimensions
19.3 x 25 x 21 in (490 x 630 x 530 mm)
Weight
293 lb (133 kg)
Crimp Force
4,500 lb (20 kN)
Stroke (Cycle Distance)
1.625 in (42 mm)
Shut Height (Lower Dead Center)
5.35 inch (135.78 mm)
Cycle Time
1.0 sec
Wire Stripping Length
.04-.40 Inch (1 to 10 mm)

Specifications are subject to change without notice, and exceptions may apply depending on application, wire and other variables. Optional equipment may require standard machine modification and/or later specifications.