C-5

Measure & Cut-off Machine

The Artos C-5 products provide high-speed measure and cut-off of many applications including wire, cable, tubing, tape, labels, textiles, screen, celluloid, sand paper, shim stock. etc. The C-5 pulls material in strip form (usually provided on a reel or spool), measures the material to a programmed length, and cuts the material using steel cut-off blades.

Set-up and operation of the C-5 is performed through the use of digital counters and electronic controls. Material guides are easily adjusted for each application requirement. Multi-material guides are available to feed from more than one material source for increased productivity. Additional design features include a durable roller feed system and robust cutting mechanism designed for years of continuous operation.

Features

  • Robust, durable design for long life.
  • Power-stroke mode for powerful applications.
  • Two modes, depending on width of material.
  • Multiple guide kits for feeding a variety of materials.

Specifications

Dimensions (C-5) – LxWxH
25 x 20 x 14 in (635 x 508 x 355 mm)
Weight
160 lb (73 kg)
Max Cutting Width
13.5 in (342 mm)
Material Length
Max 328 ft (99.9 m) / Min 0.04 in (1 mm)
Material Thickness
0.25 in (6.3 mm)
Feed Rate
Variable from 6.4 in to 100 in/sec (0.16 to 2.5 m/sec) with adjustable acceleration/deceleration ramps.

Specifications are subject to change without notice, and exceptions may apply depending on application, wire and other variables. Optional equipment may require standard machine modification and/or later specifications.