CR.22

Automatic Crimping Machine

Expanded capability for weather seals or twisting/ tinning

Built on the same platform as our popular Cr.11, the Cr.22 offers up to four processing stations for a wider range of end of wire applications including terminal crimping, weather seal application or wire end twist and tinning.  Similar to our Cr.11, the digital servo driven Cr.22 offers unique set-up features designed to shorten the machine set-up time, allowing for processing both large batch size and high mix production runs.

Features

  • Expanded capabilities with 4 processing stations for seal or tinning applications.
  • Ideal for high volume or high mix production needs.
  • Cutting edge digital servo technology.
  • Best in class performance and value.
  • Simple to operate and maintain.
  • Robust design.
  • Low operating cost.

Capabilities

  • Material Cutting
  • Stripping
  • Window / Mid Stripping*
  • Open Barrel Crimping
  • Closed Barrel Crimping
  • Insertion of Weather Seals*
  • Wire End Twisting*
  • Wire End Tinning*
  • Hot Stamp Marking*
  • Ink Jet Marking*
  • Marking with Labels*
  • Batching of Finished Wires
  • Coiling of Long Wires*
  • Short Length Processing
  • Harness / Job Sequencing

*requires additional accessory purchase

Specifications

Wire Size
30-12 AWG (0.05-4mm2), optional to 10 AWG (6mm2). Maximum wire OD is 0.210 inch (5mm).
Wire Lengths
1 in – 325 ft (25 mm - 100 m).
Strip Lengths
0-1.26 in (0-32 mm).
Voltage
230 V 60/50Hz 1 Phase, optional 208V. 60/50 hz, 1Ph.
Air Supply
5 CFM @ 80 PSI (2.3 l/sec. @ 6 Bar)
Machine Weight
Approximately 1900 lbs. (864kg)
Machine Dimensions

  Length w/ Straightener
125" (3175 mm)
  Width w/ Carts
53" (1346 mm)
  Height
(Guard down) 65.5" (1664 mm)
  Height
(Guard open) 101" (2557 mm)

Specifications are subject to change without notice, and exceptions may apply depending on application, wire and other variables. Optional equipment may require standard machine modification and/or later specifications.